Product FAQ

Nail strips generally last about two weeks

The following are some of the more common situations in which nail strips are more likely to fall off.

The most important thing is to use the supplied alcohol pads to clean your nails to remove oil and moisture and improve the adhesion of the nail stickers. This is the key.

1) The exposed part of the nail is not supported by the nail itself. After the nail is lengthened, try to avoid using the protruding part to open hard objects (such as soda cans).

2) After using the nail primer, you need to wait a few minutes to form a protective film to protect the nail, and then Then apply nail strips

3) Apply Ohora professional glossy gel to the entire nail veneer. Note: When applying nail strips, please pay attention to apply directly from the root of the nail. If it sticks to the skin, the adhesive force will be reduced and it will lift. After applying the nail strips, please use a wooden stick to gently press it again to let the bubbles inside dissipate.

After lighting, it is recommended that you apply Ohora professional glossy gel, which can make the nails shine brighter, the nail stickers are harder, and the nail strips can be lengthened and maintained. time. Remember to apply UV light 1-2 times after applying the brightening gel.

Each box of nail stickers contains mini nail scrapers, small wooden sticks and wet wipes, as well as 30 nail strips (different sizes)

Due to the nature of the product, Ohora nail strips are not a product with an individual expiration date.
After using the product, you can continue to use it if you keep it in the nail sticker box!

🔸Tips on storage precautions!

1) Avoid direct sunlight and store in a cool place. Nail stickers may harden when exposed to sunlight (ultraviolet, UV).

2) Store the nail strips at room temperature (20-30 degrees). When the nail strips is stored in a low temperature place, it may temporarily harden, but if the temperature rises, it can be softened again for use.

There are usually two reasons for the experience of getting your hair caught:

● When the nail strips remains on the end of the nail
● When the nail strips is not properly attached to the nail

🔸 We will guide you with some tips to accomplish this and prevent your hair from constantly getting caught

① Clean your hands and use Ohora alcohol wipes to remove oil and water from your nails.

② When choosing a nail strips that suits your size, please choose a size that is slightly smaller than your fingernail.

③ Please apply it slightly away from the cuticle line. During the curing process, hair may get between the nail and the nail strips due to the oil and moisture produced by the cuticle.

④ Press the edge of the nail firmly to make it fit the nail perfectly. The nail strips must be perfectly adhered to the nails to increase durability and prevent hair from getting caught
⭐️For better results, it is recommended to gently press the cuticle line with a wooden stick❤️

⑤ Use a UV light to remove the remaining nail strips on the nails Cut off, leaving a 1mm edge and cure 2-3 times. (The recommended number of curing times is 2-3 times. Please note that if the number of curing times exceeds this number, the nail tip may break.)

⑥ After the nails are hardened, use a nail file to make your nails more beautiful! But please note that if you use hand cream and lotion before and after applying nail strips, the adhesion and durability may be reduced and may cause hair to get in.

If you don’t have Ohora Pro Easy Peel Remover, don’t worry because you can still use a commercially available acetone-based nail polish remover to remove Ohora nail strips.

Do not force the nail strips to be removed as this may damage the nails.
Be sure to follow the tips for removing nail stickers listed below.

Tips for easily removing Ohora nail strips:

1. Moisten the included wooden stick with nail polish remover (acetone), and gently push the edge of the nail sticker (that needs to be removed) to create a gap

2. Wet the wooden stick fully with nail polish remover, Work through the gap created and push the adhesive out repeatedly as it melts to minimize damage to your fingernail or toenail.

3. If the nail strips remain on your nails or toenails, they can be easily removed using alcohol cotton or wet wipes. If it is difficult to remove, do not tear it off too hard as this may damage your fingernails or toenails.

4. For Ohora nail sticker glitter and pearl type - it is more difficult to remove than the general nail sticker type, so please soak the stick properly and then remove it slowly

Ohora nail strips have slightly different ingredients than Gel nail polish. Therefore, you can cure your nails using a regular UV lamp that is commonly used in stores or at home. However, for better nail strips results, it is recommended to use an Ohora UV lamp when curing nails.

Commercial gel lamps have higher output than Ohora UV lamps; therefore, one or two cures are recommended :)

If the nail strips itself has protrusions or is equipped with gems, please apply a transparent sticker before applying the nail sticker to prevent the protrusions or gems from directly pressing onto the nail surface, causing scratches.

After applying the transparent strips, apply the nail strips and then follow the usual steps to illuminate it.

Ohora's nail strips are safe products that have been tested for safety and can be used with confidence. However, it is not recommended for infants or children as they may bite their nails. Please refer to your doctor's advice before use.

Ohora is a cruelty-free and vegan brand, as Ohora products are not tested on animals and do not contain any animal products or ingredients of animal origin.

While there are no harmful ingredients in our products, this product does contain acrylics. We recommend not using this product if you are allergic to it.